Manual bar Bending Machine
Manual bar Bender Machine is one kind of steel bar processing machine, widely used construction building field. It constitued by the motor, gear, operation disc, breaker and machine body. GW50 manual rebar bender machine is able to bend ribbed steel bar diameter from 6mm to 40/50/6070 mm, with various shapes using in construction project.
|Technical Parameter of Manual Rebar Bender Machine|
|Max Bending Ability||Plain carbon steel||Φ50mm|
|Operation disc spec||Φ380mm|
|Axis Rotate speed||10r/min|
|Motor Rotate speed||1440r/min|
The Process Pictures of the Manual Bender Machine
Why choose Winwin TMT Bars Machines?
Features of GW50 Manual Rebar Bender Machine
1.The motor,100% copper motor with speed 1420r/min, normally this motor can work 2 years without breaking;
2.The gear, our gear material ductile iron QT500-7 which have high precision and hardness, promise machine capacity, dural above 5 years. All the gears are fine processed twice;
3.The operation disc material carbon structure steel 45# guarantee the disc long time use with 24 hours;
4.The painting, anti-rust spray painting inside and outside, beautiful and promise long machine life in working condition;
5.GW50 Manual Rebar Bender Machine adds eccentric bushing, ultra-high hardness accessories and adjustable baffles, special for different diameter and longer service life.
◆Life- long free training and guidance.
◆International engineers ready to go abroad for installation, maintenance and commissioning.
◆Free training of operation and maintenance for clients in our factory.