Rebar Cutting and Bending Machine
Our rebar cutting and bending machine is fabricated as a useful equipment for cutting rebar. In general, it is mainly used in such construction projects that is house construction, bridge construction and rebar processing factory. Its superior design and reasonable price are warmly welcomed by the customers.
|Top Quality GW50 Automatic Rebar Cutting and Bending Machine|
|Brief Introduction||rebar cutting and bending machine
Characterized by advanced design,easy operation process,
Safe and reliability as well as stable performance.
It is able to crook round steel bar with Dia 6-50mm into various shapes that required,
And it can be utilized in road,bridge,tunnels and other giant construction projects
|Features and Advantages||1.The AUTOMATIC model adopted Brake Motor, which largely protect the motor and prolong the service life of motor.|
|2.insert pin type location disk to ensure the ACCURACY of bending radian and the convenience of the adjustment|
|3.Adopted the FULLY ENCLOSED TYPE CASE so that distortions, which happen under the condition of heavy load, can be avoided|
|4.pour enough lubricant before using for new machines, no need to refill again.|
|5.The stop gauge can be INSTALLED from FOUR DIFFERENT CORNERS to realize the requirement of putting steel bar from various directions.|
1) 12 Months from the date of the commissioning or 14 months from the date of the bill of lading, whichever is earlier. However, does not include usual wear and tear or defects caused due to mishandling.
2)During Warranty period, the manufacturer shall replace the detective parts at his own charge.
3)The buyer shall replace and store the failed parts on the be-half of the manufacturer for inspection or on request, return the same to the manufacturer.